Recovering my Lumia from bricked / emergency state

2 days ago, My Lumia 625 started to hang and keep making problems, and I finally decided to reset it through the WPRT. So I proceed to WPRT and connecting my L625 to PC and install the software as usual.But suddenly , WPRT shows an error that “The Operation could not be finished” and my L625 turns black and can’t restart and even no sign of the phone alive ( Light Exposure, red screen , etc).

So i check again with WPRT and it could not detect my L625 , so i decided to go to “My Phone Was not detected” button and choose my Device Manufacturer, Lumia

Screenshot (683)

After that , once it detected my L625, it brings me to the Software Version checking…  Refer image below

Screenshot (684)b

Ok now i know that my Device is still alive and in UEFI mode or QHUSB_DLOAD (the name of the device at the moment) . Then i proceed by clicking Install Software.

It will take a moment to download the Emergency Packages from Microsoft Servers and soon it started to flash my L625 with the emergency package to recover / return to the Red Screen mode.

Screenshot (685)

At first , i have tried to install the emergency package for about 10 times but it always ended up with error message ” The operation failed” “Could not found device”

Screenshot (686)

That night, I try again and it succeed!. My Phone has been flashed with emergency package and return into normal UEFI mode ( The Red Screen with large NOKIA ) .

Then I proceed with software Installation, and again as expected, it failed again and ask me to reboot the device.So i try it and keep rebooting my device for around 3 times. You know what? Miracle happens…. I tried again while watching the Log Files in Temp Directory, and it started to install the software smoothly without the previous error.Screenshot (687)bScreenshot (691)

Ok Let me Summarised it :

  1. Disconnect your phone from your PC
  2. Click on My Phone was not detected button
  3. Reconnect your phone to your PC
  4. If you were prompted to choose your Phone Manufacturer choose either Lumia, if you are using Lumia Devices or HTC if you are using HTC One.
  5. Wait for your computer to detect your phone and follow the screen instructions. If the phone still not connected try reboot it by pressing the combination of Power Key + Volume Down Key 
  6. Once you have been brought to Software Versions checking ( refer Screenshot 2 ) Press on Install Software and it will begin downloading emergency packages and Software Packages and install it.
  7. You’re done

So far, in my case, i have not used any manual steps like install the Software via CMD Prompt using the suitable Hex for the phone etc…  I am grateful that my Lumia 625 back alive!

For more info on WPRT refer my last post or refer Microsoft Mobile Support Page

How to use Windows Phone Recovery Tool?

Its been a long time since i last update this site on December 4, 2014 . So today, I would like to guide on how to use Windows Phone Recovery Tool (WPRT) . Maybe you have been familiar with the Lumia Software Recovery Tool ( LSRT), for your information the WPRT is another synonym software or handy tools by Microsoft that is specially created for Windows Phone 8 users specifically for Lumia’s and HTC One users.

What happened to the old LSRT?

Don;t worry, the LSRT still can be used. It is used for Recovering Nokia’s Phone Software/Firmware.

You may refer here on how to use the LSRT.

Which tool should I use?

Use the Windows Phone Recovery Tool for the HTC One and all Lumia phones running Windows Phone 8 or newer. For all other Nokia branded phones use the Lumia Software Recovery Tool. To see which Windows Phone operating system (OS) version is currently installed on your phone, go toSettings > about.

Taken from

So Let’s get started!

So , First, let’s download the Windows Phone Recovery Tool from Microsoft Mobile Website.

Screenshot (716)


Next you have to install it first

After you have successfully installed it, connect your phone and launch it

You’ll get this screen

Screenshot (718)


Now , click on your phone as listed in it. As mine it was the Nokia Lumia 625

Then you’ll see this screenScreenshot (719)


In this phase the WPRT will check either your phone has the same version of Software with the server or not..If not it will download the latest software and install to your phone. In my case, I already have the latest Software which is Windows Phone 8.1 Update or Lumia Denim. So, for who did not have the latest software just proceed by clicking the Install Software button, while for those who already up to date and wanted to reinstall your phone software click on the Reinstall Software.

This will bring you to the next step which is Checking for the compatibility of Downloaded Files ( The OS/ Firmware images ) for those who already downloaded it.For those who doesn’t download it yet , you may have to wait for WPRT to download your phone OS / Firmware images to be downloaded before you can proceed to next step.

For the next step,

WPRT will start installing the Phone Software, and if you noticed it has rebooted your Lumia or HTC Smartphones into UEFI mode or known as Red Screen mode for Lumia users ( Red Screen with large NOKIA logo).

The installation process will begin….

Please make sure that your phone battery level is full and you USB cable is untouchable or undisturbed in order to prevent the software from being failed to install.

If the software is failed to install, your phone will be bricked or cannot be use and it will activate or put itself into emergency mode/ emergency state which is in black screen.You may need to run emergency flashing. I will explain on this later.

After the installation finished, your phone will be rebooted and you’ll have to set it up back according to your preferences.

That’s all.Thank you for reading!

For more info , go to Microsoft Mobile Support Page.

Next in the list : Emergency Flashing on my Lumia!!


How to use Lumia Software Recovery Tools on S40

Before this Nokia have released the Nokia Software Recovery Tools( Currently Lumia Software Recovery Tools ) to help Nokia Phones users to troubleshoot their phones by  re-install their phone OS in order to make their phone problem-free / factory resetted by using the OS image provided by them..

In the easy way to understand :

Lumia Software Recovery Tool can help you to reset and recover your phone software at home, if your phone is experiencing software related or software update problems. With Windows Phone 8  models, you can also use Lumia Software Recovery Tool  to recover your phone in case your phone is not responding, it appears to be stuck, or it is not starting. -Taken from Microsoft Mobile FAQ

Prerequisites for your computer (PC):

  • Microsoft Windows 7 or newer.
  • USB cable to connect your phone to the computer.
  • Minimum 4 GB free storage space.

Supported phones:

  • Lumia phones

  • Asha and Series 40 phones that have USB interface

  • Series 30+ phones that have USB interface

  • Nokia X2 platform phones

  • Symbian phones

Taken from Microsoft Mobile FAQ

Before this I have tried on my Lumia 625 , i’ll update about it later…

But first Let;s get started with our Nokia C3 running on S40…

Before you started to Flash your phone with LSRT , you’ll need to backup your phones before proceeding with it..because in the next step, LSRT will completely removed all items or format your phone.

Ok First of all :

Backup your phone ( in this tuts i’m using Nokia C3 ) using Nokia Suite, you can get it here : 

Screenshot (103)


2nd :

Next get the Lumia Software Recovery Tools here from Microsoft Mobile Support Site :  and install it.

After the installation finished, Run LSRT and wait for it to detect your phone.After it detected your phone, it will show like this (refer image below)

Click Install to proceed.

Screenshot (102)


3rd :

Next , you will get a message that you must acknowledge it before proceed to download the software..

This message is important and you may lost any important things you left on your phone if you are not creating any backup before.

Tick on the box and Continue

Screenshot (104)


4th :

LSRT will prepare and start to download the Nokia C3 Software Package from their server.This will take 1-5 min or 5-10 min.Leave it until the downloads done

Screenshot (105)

Screenshot (106)


5th :

After the download done, LSRT will start to install the downloaded software into your phone.At this stage , do not touch or do anything with your phone. Just follow the on screen message.

Screenshot (107) Screenshot (108)


Finally :

After the installation completed , LSRT will attempt to restart your phone in around 2 minutes.If your phone isn’t restarting and in my case it showing Test Mode , you are safely to remove the battery and restart your phone and you’re no longer need to connect it back since the installation has done..

Screenshot (109)

How to re-upgrade Windows 8.1 after reset your pc back to Windows 8

Since long time i didn’t post anything here, now i would like to share something that may be useful and ease your day.

Re- upgrade Windows 8.1

Maybe before this you reset / refresh your PC or even restore to Factory Default/Settings due to some malfunction or error that keeps happen on your PC.. Then you wanted to re-Upgrade to Windows 8.1 from the Windows Store , but suddenly your actions were stopped by a message saying that you need to update you PC to the latest Update Definitions..

As on my experience, just in this month, i have installed all updates and keeps getting the :

Failure  configuring Windows Update

      Reverting Changes. Do not turn off your computer

This might been more frustrating since you are trying to install all of it and suddenly it come and again, and again..and the most frustrating is when your PC is stuck in the boot loop / in the error message for more than Hours.. As for me i tried troubleshoot it by entering safe mode and everything but it only a temporary since i can’t find what updates actually failed to be configured.

Screenshot (2)



So let’s back to the point , i go to Google and search for Windows 8.1 Windows Update Definition and finally i found it. (you can get it here : )

Screenshot (60)

Ok , grab the versions the matches with your Operating System bit , like mine was x64 for 64-bit .(TIPS : 32 bit also known as x86)

Screenshot (61)

Next , install the downloaded Windows Update package.May take a while.

Screenshot (8)

Once it is done, restart you PC to make your PC configure it.

Then, go to Windows Store and click on Windows 8.1 Upgrade..

Voila, now you can re-upgrade back to your previous Windows 8.1 .

Screenshot (12)

-Myh Yazid

Repost : How to Install MariaDB in Ubuntu

MariaDB is a community-developed fork of the MySQL relational database management system, the impetus being the community maintenance of its free status under the GNU GPL.

MariaDB is another alternative that derive from mysql..In this case we would like to test and share the guide on how to install MariaDB

  1. First of all open terminal and type this

    sudo apt-get install python-software-properties

I recommend you to use MariaDB version 10.0.4 Alpha because when im installed it i’ve got no errors compare with 5.5 version.

Update : logon to for latest version

2: Put this commands in terminal

sudo apt-get install software-properties-common

sudo apt-key adv --recv-keys --keyserver hkp:// 0xcbcb082a1bb943db

sudo add-apt-repository 'deb quantal main'

If you’re using other version please change the “quantal” to your ubuntu version codename

eg : 13.10 saucy
     13.04 raring
     12.10 quantal (im using this version)
     12.04 precise`

3: Type in this commands

sudo apt-get update
sudo apt-get install mariadb-server

4: after finished installed mariadb you need to run this

sudo mysql_install_db
sudo /usr/bin/mysql_secure_installation

If have problem consider look at the end of this post for solution

5: You’re done!!

Problems solving

In step 3 if you get problem, like unmet dependencies, Go to /etc/apt/preferences.d then create new file called “mariadb” Then,Consider to put the below code in the mariadb file that you just created

Package: *
Pin: origin <mirror-domain>
Pin-Priority: 1000

In step 4 you may get 2 errors

  1. first occur when you run sudo mysql_install_db Solution : open another terminal and do this killall mysqld

    2.second eror may occur when you running sudo /usr/bin/mysql_secure_installationcommand

Solution :

try doing this

cd /etc/init.d and try run ./mysqld start
if ./mysqld doesnt exists use ./mysql start as in my case

That’s All Thank you for reading.

I wrote this based on my experience installing this.Any errors you get community here can help you if i cant..tq


WordPress 3.8 dilancarkan!!!!!

WordPress 3.8 dah datang!!! yawwww

Mesti ramai yang sudah tau mengenai WordPress.Tapi bagi yang belum lagi tau ini adalah sedikit ringkasan mengenainya :

WordPress ialah salah satu “Content Management System ” atau CMS yang paling kerap digunakan di dunia blog ini…(ringkaskan?..hehe)

Apakah perbezaan di antara Dan WordPress 3.8??

Perbezaanya adalah

  • dihostkan di server mereka manakala WordPress 3.8 adalah dihostkan sendiri oleh kita.
  • tidak boleh menginstall plugins Dan themes,manakala WordPress 3.8 atau senang dikenali sebagai boleh melakukan perkara tersebut

Jika Ingin tahu lebih lanjut mengenai WordPress layarilah

[alert style=”green”] WordPress Codex[/alert]

Ok,Sedikit info mengenai WP 3.8….

Dengan pembangunan yang giat dijalankan oleh pihak WordPress,banyak perkara-perkara baharu yang diimplementasikan oleh para pembangun WP.

Antara perkara atau pembaharuan yang hadir pada versi 3.8 ini adalah Reka bentuk baru Dan Reka bentuk yang responsif bagi memudahkan blogger semua update blog mereka dengan mudah dengan hanya menggunakan telefon pintar atau tablet.

Screenshot (105)

[alert style=”green”]Muat Turun WordPress 3.8 Sekarang!!![/alert]

Create your own website now using joomla and wordpress.

Create your own website now!

How to start?

you can start on by purchasing web hosting and domain first.

Ok next…

next after you have bought your own domain and web hosting you can start by installing CMS on it.

What is CMS??

CMS stand for Content Management System.

wow amazing..what it is??

as i state in this post title “how to create your own website using joomla and wordpress..”

so the example of CMS is Joomla and WordPress.

What was the differences between this both

Joomla is suitable for governments, school,and office website.

While wordpress is suitable for personal blog and blog..lets take an example of wordpress…like this website and like TNW i think…

Let’s get started

if you are new here you can search for how to install joomla and how to install wordpress using the search box.

i don’t know how to do,,can you make it for me

yup i can make it for you for free but the time it depends on what you want to put in it see more below..

i have installed it how to get started?

you can get started by customising your frontend view by downloading template and use it on your website.

Wow i’m very clueless..i don’t know how to do,,can you make it for me

again….yup i can make it for you for free but the time it depends on what you want to put in it see more below..if you don’t have any domains and web hsoting i can do it from scratch but we need some details…


after you have choosen template,extension and many more you can start writing post on it..

wait…i want you to create this for me

ok if you wanted for me to create your website for free..You have to give your details as what we needed..

Fill in your name ,email,tel no and domain that you wanted to use in the form below…we will ask your details via email…

    nuffnang_bid = "e1fdf91bea0de4053d343715e45472e2";
    document.write( "<div id='nuffnang_lr'></div>" );
    (function() {   
            var nn = document.createElement('script'); nn.type = 'text/javascript';    
            nn.src = '';    
            var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(nn, s.nextSibling);

    nuffnang_bid = "e1fdf91bea0de4053d343715e45472e2";
    document.write( "<div id='nuffnang_lr'></div>" );
    (function() {   
            var nn = document.createElement('script'); nn.type = 'text/javascript';    
            nn.src = '';    
            var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(nn, s.nextSibling);

UPSR beberapa hari sahaja lagi…

UPSR- Ujian Penilaian Sekolah Rendah

UPSR countdown telah bermula..

Hari ini sudah masuk hari ke 3 bulan September dan hanya tinggal 10 hari lagi untuk anda bersedia.Tetapi bagi yang ingin mengelakkan stress makanlah kismis dan baca buku pada waktu malam..Tidak perlu hafal secara keras atau paksaan kerana tidak semestinya yang tidak beljaar itu tidak akan mendapat 5A dan tidak semestinya yang belajar akan mendapat 5A hanya bergantung kepada takdir tetapi jika anda berusaha bersungguh-sungguh anda pasti akan dapat jawab..


Ada sedikit tips..

UPSR ni tidak sesusah mana seperti Ujian Percubaan UPSR , tetapi ia hanya mudah bak kata pepatah senang kacang putih…Soalan nya tidak sesusah mana yang paling senang adalah Semua subjek tetpi bgi sesetangah Subjek Sains paling senang tetapi bagi yang lain akan mengaggapnya susah..Jika anda ingin tahu Sains dan ke5 lima subjek teras adalah yang pling senang untuk dijawab


PErtama makanlah Kismis terutama sekali Kismis yang telah dibaca 30 juzuk ayat al quran

Minumlah air yassin yang telah diberikan oleh pihak sekolah atau yang telah dibuat oleh ibu bapa

Baca buku pada waktu malam dan selepas itu makan kismis dan minum air yassin kemudian pada keesokkannya pagi sebelum mandi atau selepas bangun pagi cepat-cepat minum air yassin walaupun terdapat air liur basi di mulut..



How to create your online Radio?

Freq, Radio….. vs Online Radio

First of all maybe you wanted to create a radio for your company or for fun.But this is the modern way to have radio.It is online.If you prefer radio that using frequency like car radio,we will catch it up later.But first of all maybe you wanted to created a radio.Isn’t right?Yes of course.Here i Have an example of it. The first school Radio in Malaysia Sintok FM . They created their own radio online.SO if you want like this follow this steps.


Setup the prerequisites. The things that we gonna have is the things i listed below.

[ul type=”check”]A server or VPS – Checked [/ul]

[ul type=”check”]PC’s that will be used  for radio control panel – checked[/ul]

[ul type=”check”]AN Equaliser ( if needed,but it is needed in this step)- checked[/ul]

[ul type=”check”]and that it is![/ul]

Ok we will start with a server or VPS.

Server or VPS

Once you wanted to create your own radio you will need this two either Server( dedicated or your own Server) or VPS.In this step i will suggest you to choose Staminus Corp. It’s provide you with cheap dedicated hosting and VPS.For VPS it is only for $19/month.Why i choose Staminus,because when I was doing a research on the SIntok FM using whois on their radio IP that is it show that Sintok FM hosted at Staminus here is the whois result :



If for fun you also can use the free VPS from

ok we will proceed to the next steps

PC for control panel

you only needed 1 pc or if you have more dj in 1 conty you will need to have at least 3 pc maximum.

AN Equaliser

you will need an equaliser for your radio to launch your own radio.You also will need headphones with microphones and a microphone for extra.

Ok next

The Software

You will need to download this software according to your server os

All the software you needed has listed on this website .

[button url=”” target=”e.g. _blank or _self” style=”blue” size=”medium”] Click here to download all the required software[/button]

You just need to download and install it on the server and you’re done.

And you’ll have to setup the software according to your preffered settings.

[alert style=”red”]We will not be responsible if something happen to you.[/alert]


How to build your own Web Browser using Chromium

First of all you need this things :

  1. Prerequisite software:
    • Windows 7 or later.
      • A 64 bit OS is highly recommended as building on 32 bit OS is constantly becoming harder, is a lot slower and is not actively maintained.
      • At least 60 GB of free space in an NTFS volume. Tip: having the chromium source in a SSD drive greatly speeds build times.
    • Visual Studio 2010 Professional or Standard.
    • Windows 8 SDK.
    • June 2010 DirectX SDK.
    • (Optional) Cygwin
  2. Install Visual Studio 2010
    1. Make sure “X64 Compilers and Tools” are installed.
    2. Install VS2010 SP1.

  3. Install the Windows 8 SDK.

    Note: If you install the SDK in a path different than C:Program Files (x86)Windows Kits8.0 you need to set the following following environment variable:

    GYP_DEFINES=windows_sdk_path=”path to sdk”

  4. Install the June 2010 DirectX SDK
    Note: If your install fails with the “Error Code: S1023” you may need to uninstall “Microsoft Visual C++ 2010 x64 Redistributable”. See this tip from stackoverflow:

Next you’ll need to patch Windows 8 SDK

    1. Parts of Chromium build using the winrt headers included with the Windows 8 SDK. All the headers we use, including the WRL, can be compiled with Visual C++ 2010 with the exception of one file, asyncinfo.h. This file uses a strongly typed enum which the VS2010 compiler doesn’t understand. To workaround this for the time being, a small patch needs to be applied to the Windows 8 SDK to build with the winrt headers in VS2010:

      Patch for Includewinrtasyncinfo.h

      Index: asyncinfo.h
      — asyncinfo.h
      +++ asyncinfo.h
      @@ -63,7 +63,7 @@
       #pragma once
       #ifdef __cplusplus
       namespace ABI { namespace Windows { namespace Foundation {
      -enum class AsyncStatus {
      +enum /*class*/ AsyncStatus {
         Started = 0,
      This patch should be applied to the file “Includewinrtasyncinfo.h” located in your Windows 8 SDK directory. If this patch is not applied, the parts of Chromium that use the Winrt headers will not compile.
      Note: By default the Windows 8 SDK will install to C:Program Files (x86)Windows Kits8.0. This directory will require admin privileges to write to. Easiest way to do apply this patch is tostart an administrative command prompt, cd to C:Program Files (x86)Windows Kits8.0Includewinrt, run notepad.exe asyncinfo.h and comment out or delete the word “class” on line 66.
      Note: For Googlers, this patch has already been applied to your SDK, everything should Just Work.
  1. (Optional) Install cygwin

Next Build Chromium.

First of all you need to download the depot_tools from here . or the installer ( the installer is not from The Chromium Authors but I creatd it for you to easily extract it without have to waiting for a long time

After you have download it extract it to C: . Next you will need to :

  1. Check out the source code using a direct svn or git checkout. Do not use a tarball since it is not compatible with Windows’ svn client.
  2. Set up the component build (or else creating chrome_dll.pdb may fail laterl) and then regenerate the build files by running “gclient runhooks –force” in a cygwin/cmd window.
  3. Install API keys.
  4. Open the chrome/chrome.sln solution file in Visual Studio and build the solution. This can take from 10 minutes to 2 hours. More likely 1 hour.
  5. If you just want the Chromium browser, and none of the tests, you can speed up your build by right-clicking the chrome project in the solution explorer and selecting Build. You may want to make sure this project is the Startup project (which will display as bold) by right-clicking it and selecting Set as Startup Project. This will make Chromium (as opposed to some random test) build and run when you press F5.

[alert style=”yellow”] This Step was originally taken from Chromium Project Page. [/alert]